AI that finds the supplier risk
before production stops.
Upload supplier performance data, PO logs or procurement reports. OpsOracle AI scores every supplier on OTD reliability, flags components below safety stock, identifies single-source risks — and gives procurement the action plan before the line stops. In under 30 seconds.
Supply Chain AI Capabilities
Built for procurement managers and supply chain leads
Not a generic AI. Every engine is calibrated on supply chain signals — OTD variance, safety stock adequacy, single-source concentration, critical path component risk.
Supplier Risk Scoring
Score every supplier on on-time delivery rate, lead time variance, and single-source dependency. AI ranks suppliers by production risk so procurement knows exactly where to focus vendor management effort.
Critical Component Stockout Alert
Flag every component that is below safety stock with a supplier whose lead time means you cannot restock in time. AI calculates days-to-stockout per part and names the production lines at risk.
Lead Time Variance Analysis
Compare promised vs actual lead times per supplier over your entire PO history. AI identifies which suppliers consistently underperform their commitments — with financial impact of the gap calculated.
Open PO Risk Assessment
Score every open purchase order by the supplier's historical OTD rate. AI flags high-risk POs where a late delivery will breach a production deadline, so you can expedite before it is too late.
Safety Stock Adequacy Scoring
Calculate whether your safety stock levels are adequate given each supplier's actual lead time and OTD variance — not just the promised lead time. AI recommends revised safety stock per critical component.
Supplier Diversification Analysis
Identify critical path components with single-source suppliers. AI quantifies the concentration risk and recommends which components to dual-source first based on production impact and sourcing feasibility.
Real Pain → AI Solves It
Your team faces these every week.
OpsOracle names them and fixes them.
Actual AI output from real Supply Chain data. Upload your report and get this analysis in under 30 seconds.
The Pain
ImportComp China keeps missing delivery. Lead time is 45 days. We only have 2 Sensor-F6 units left. Production stops next week.
Raw data signal
ImportComp China · Sensor-F6 · stock=2 · safety_stock=20 · lead_time=45d · OTD=38% · Risk=CRITICAL · PO_Value=₹2,20,000
OpsOracle AI Output
Sensor-F6 stock is 2 units against safety stock of 20 — 10× below threshold. ImportComp China OTD is 38% with 45-day lead time, meaning the open PO (₹2,20,000) has a 62% chance of arriving late. Production stops when this hits zero, estimated 3 days at current consumption.
[THIS WEEK] Action
Procurement to (1) expedite existing PO via air freight today — accept 40% premium to prevent line stop. (2) Identify alternative sensor supplier with <21-day lead time. (3) Qualify backup vendor within 30 days to remove single-source dependency on this CRITICAL component.
Expected impact: Prevent production stoppage worth ₹8,50,000/day; eliminate single-source risk on critical path component
The Pain
ChemSupply Mumbai promised 21 days. Actual is 35. The adhesive is running out. Two assembly lines depend on it.
Raw data signal
ChemSupply Mumbai · Adhesive-C3 · stock=8 · safety_stock=50 · lead_time=35d · promised=21d · OTD=44% · Risk=CRITICAL
OpsOracle AI Output
Adhesive-C3 is at 8 units against safety stock of 50 — 84% below minimum. ChemSupply's actual lead time is 35 days vs promised 21 — a consistent 67% lead time miss. With 44% OTD rate, the open PO is likely to arrive in 35–42 days. You have approximately 1–2 days of stock left.
[THIS WEEK] Action
Operations to ration Adhesive-C3 to highest-priority assembly lines immediately. Procurement to source spot inventory from any distributor within 48 hours. Escalate ChemSupply account: demand penalty clause enforcement or switch to alternate chemical supplier.
Expected impact: Prevent 2-line production halt; recover ₹3,20,000 daily output at risk
The Pain
TechComp India is 62% on-time and we have two open POs. Their PCB is on the critical path for our flagship product.
Raw data signal
TechComp India · PCB-A1 · OTD=62% · stock=120 · reorder_point=300 · lead_time=21d · open_POs=2 · PO_value=₹4,80,000
OpsOracle AI Output
TechComp's 62% OTD means 38% of PCB-A1 deliveries are late. Current stock (120) is 60% below the reorder point (300) — the safety buffer is already consumed. With 2 open POs totalling ₹4,80,000 and a 21-day lead time, any further delay puts the flagship product launch at risk.
[THIS WEEK] Action
Supply chain manager to request weekly delivery status update from TechComp on both open POs starting this Monday. Simultaneously, qualify PCBFab Bangalore (same category, 28-day lead, 66% OTD) as partial backup. Target: 20% of PCB-A1 volume shifted to backup vendor within 60 days.
Expected impact: Reduce single-supplier concentration risk; protect flagship product launch schedule
14-day Pro trial · No credit card · Results in 30 seconds
How procurement teams use OpsOracle AI
Upload supplier or PO data
Export your supplier scorecard, open PO list or procurement log as CSV. OpsOracle reads any format — lead times, OTD rates, stock levels, PO values.
AI scores every supplier and component
OTD reliability scored per supplier, components ranked by stockout risk, single-source dependencies flagged, open POs rated by late-delivery probability.
Act before production is affected
Three specific actions — expedite PO, raise safety stock, qualify alternate vendor — each names the supplier, the part, and the production impact of acting now vs later.
Stop finding out about supplier failures after production stops.
Upload your supplier data now — OpsOracle AI returns risk scores, safety stock gaps and critical path alerts in seconds.
Start Analyzing Free